CASADAGLASS
Pakistan Pavilion Power

Pakistan Pavilion Power

Tempered glass package for the Pakistan Pavilion Power project, produced with heat soak treatment and impact testing.

LocationPakistan
Client / ProjectPavilion project
YearReference project

The Pakistan Pavilion Power project required tempered glass for a public pavilion environment, where safety and long-term performance are essential.

Glass specification

High-quality float glass was heated to approximately 680 °C and rapidly cooled to produce fully tempered glass: a safety glass four to five times stronger than normal annealed glass of the same thickness. If shattered, it breaks into small cube-like fragments that are not dangerous to people.

These safety advantages make tempered glass an obvious choice for commercial and residential building applications. For this project, quality was controlled through heat soak treatment, which removes any remaining nickel sulphide particles that can cause spontaneous breakage, together with impact testing.

Tempered building glass types

  • Clear
  • Tinted
  • Pyrolytic hard-coat reflective

Size and thickness

  • Maximum size: 8000 x 2400 mm
  • Minimum size: 300 x 200 mm
  • Thickness: clear 2.8 - 25 mm; tinted / reflective 4 - 10 mm

Every panel was checked for dimensional accuracy, edge quality and visual defects before packing for shipment.

Planning a similar project?

Send us the application, sizes and performance requirements. We will confirm a suitable glass build-up.

Request a Quote